Scrap Shear Waste Tyre Recycling Machine Hydraulic Tire Cutting Machine For Rubber Hose

Scrap Shear Hydraulic Tire Cutting Machine For Rubber Hose Car Tyre Recycling

Machine specification of Tire Cutting Machine

This Tire Cutting Machin is an auxiliary machine for the tyre shredder. It cuts the whole tyre into sections for assisting the shredder to work easily and at higher capacity.

It possesses such advantages as unique structure, advanced technology, low energy consumption, high efficiency, and long life.

Work principle: Put the tyre on the fork, it will be elevated to the wanted position by hydraulic system, and then it will be cut by the movable knife from the upper side and the stationary knife from the lower side.

Structure

It consists of hydraulic power unit, cutting cylinder, cutting blades, steel frame and rotary mechanism.

Features:

1. Hydraulic driving, easy operation, easy maintenance

2. Working blade length: 400mm,600mm,700mm,800mm,1000mm,1200mm.The shear with over 700mm knife edge can be used to shear waste car

3. No requirements of foundation bolts for installation, the diesel may be used for driving at the place without power supplying

Maintenance

1. Change hydraulic valves every 4-5 months

2. Add hydraulic oil every 2 months

3. Blades can be used to cut 2000T tires

4. Easy replacement of cutting blades if worn and damaged

FAQ
1. Delivery time of the Batch Off Rubber Cooling Machine?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 35 to 45 days.

2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment.

3. What's the machine quality guarantee?
Quality guarantee time is two year.We choose world famous brand components to keep our machine in perfect working condition.

4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
Small machine usually takes within 3~5 days.
Big plant usually takes about 30 days.

5.How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order. At the same time, we regularly send the production schedule and machine photos during the production process.

The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're the user around us.

6.How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport. We will pick up you at the airport.