Fully Automatic Hydraulic Tire Tread Vulcanization Press with 800T Clamping Force and Electric Heating for Precision Curing
Jaw vulcanization is a highly efficient and specialized tread vulcanization and shaping process in cold retreading (pre-vulcanized tread retreading) of mining engineering vehicle tires. Its core principle is to apply uniform lateral pressure and temperature to the tire carcass with a pre-formed tread using a jaw vulcanizing machine, completing the cross-linking of the rubber layers and the shaping of the tread pattern.
Using a pre-formed tread (with complete tread pattern) that has been vulcanized at high temperature, it is bonded to the sanded old tire carcass through low-temperature vulcanization (110–120℃) and a special adhesive.
- Equipment:Jaw tread vulcanizing machine (hydraulic drive, jaw pressure plate, heating plate)
- Principle:When closed, the upper and lower jaw plates apply uniform pressure (0.8–1.2 MPa) from both sides towards the center, combined with electric/steam heating (110–120℃), ensuring thorough vulcanization and tight bonding of the buffer rubber/adhesive between the pre-made tread and the tire carcass.
- Advantages:Uniform pressure, precise shaping, high efficiency, suitable for large-size heavy-duty tires.
Heavy-duty engineering tires for large mining dump trucks, loaders, bulldozers, etc. (23.5R25, 29.5R25, 35/65R33, etc.) Tires with intact carcass structure and only tread wear that can be retreaded.
- Uniform pressure distribution: Avoids uneven local pressure in traditional vulcanizing tanks, reducing air bubbles and delamination.
- Authentic tread pattern: Pre-fabricated tread pattern is non-deformable and highly clear.
- High efficiency: Multi-layer mold, automatic push-pull, multiple tires can be processed in a single batch.
- Minimal carcass damage: Low temperature (110–120℃), lower than hot retreading (150–180℃), protecting carcass strength.
- Carcass Inspection and Screening
- Appearance + X-ray / Ultrasonic Testing: No structural damage, no broken steel wires, no delamination.
- Wear Standard: Remaining tread ≥ 2mm
- Carcass Pretreatment
- Cleaning → Drying → Large Grinding / Fine grinding (exposing fresh rubber, without damaging the cords)
- Repairing damage (≤3 places, single hole ≤35mm)
- Applying adhesive/mortar → Drying
- Tread bonding
- Applying buffer rubber layer (intermediate pad rubber)
- Centering and bonding pre-cured tread → Roller pressing for degassing and compaction
- Jaw vulcanization (core)
- Loading into the jaw vulcanizing machine → Closing and pressurizing (0.8–1.2 MPa)
- Heating to 110–120℃ → Holding vulcanization for 120–180 minutes
- Pressure holding, temperature control, degassing
- Cooling, finishing, quality inspection
- Natural cooling → Deburring, shoulder trimming
- Appearance + uniformity + dynamic balance testing
- Temperature: 110–120℃ (low temperature, protecting the tire carcass)
- Pressure: 0.8–1.2 MPa (lateral uniform pressure)
- Time: 120–180 Minutes (larger specifications, longer)
- Environment: Fully vented, no bubbles
| Jaw Vulcanizing | Vulcanizing Tank | |
|---|---|---|
| Pressure | Laterally uniform | Circumferential, uneven |
| Temperature | 110–120℃ | 115–150℃ |
| Shaping | Precise, clear tread pattern | Moderate, easily deformed |
| Efficiency | High (multi-layer, automated) | Low (single tire/ (Minority) |
| Tire body damage | Minimal | Significant |
| Suitable for | Heavy-duty engineering tires, cold retreading | Small and medium-sized tires, hot retreading |
- Tire Carcass Qualified: No hidden damage
- Grinding Properly: Ra50–100μm, no contamination
- Tight Bonding: No air bubbles, accurate centering
- Precise Vulcanization: Strict control of temperature, pressure, and time
- Finished Product: No air bubbles, no delamination, clear tread pattern, bonding strength ≥8N/mm
Jaw vulcanization is the preferred process for cold retreading of mining engineering vehicle tires. With its uniform pressure, low-temperature precision, high efficiency, and stability, it allows retreaded tires to approach the performance of new tires (lifespan reaching 85%+ of new tires), while costing only 30–40% of new tires, significantly reducing mining operating costs.
-
45 kgf/cm² Hydraulic Vulcanizing Press for Rubber Backed Ceramic Wear Liners for Mining Chutes
Typical Application Scenarios for Rubber Ceramic Wear Liners Rubber-backed ceramic wear liners are engineered for high-abrasion and high-impact service in mining, bulk material handling, and mineral processing plants. Common installation points include: Conveyor transfer points and transfer chutes ... -
22 Inch Open Roll Rubber Mixing Mill Machine with Hydraulic Adjustment and Stock Blender
22" Open Roll Rubber Mixing Mill Machine For Rubber Compounding Applications The rubber mixing mill machine is widely used in the milling process of rubbers and rubber products. This machine is primarily used for mixing raw rubber, rubber compounds, thermoplastic materials, or ethylene-vinyl acetate ... -
110L Rubber Internal Mixing Machine, Sealed Rubber Mixing Machine, High-Precision Mixing Equipment, Rubber and Plastic Mixture Machine
110L Rubber Internal Mixing Machine High-precision sealed rubber mixing equipment designed for rubber and plastic mixture applications with advanced temperature control and material flow optimization. Manufacturer Expertise Qingdao Beishun Environmental Protection Technology Co., Ltd. specializes in ...